Remove Hot End on MOD-t 3D Printer

Here are the steps to remove the hot end from the MOD-t 3D Printer to remove a piece of broken filament:
1. Unplug your printer. 2. Wait for the hot end to cool (about 15 minutes). 3. Remove the hot end. - Loosen the contact. - Pinch all wires together and pull. - Use a wrench (10mm or adjustable wrench) to hold the nut in place while you unscrew the hot end. 4. Cut the stem of filament flush with the top of the hot end barrel. 5. Reattach the hot end. - Align the hot end barrel with the nut. Make sure the threads are aligned correctly. - Twist the hot end to screw it back in. - Use your wrench to hold the nut in place while you tighten the hot end. Be sure that the wires are facing towards the contact. - Plug in the hot end. 6. Plug in your printer. 7. Initiate a load through either the store or the MOD-t desktop app. 8. Start a print

See other articles in Printers.